Tips For Avoiding Fraud at Auto Body Repair Shops

Posted on Aug 27 2022 - 9:33am by Daniel Axe

There are two primary types of car parts available on the market: factory and aftermarket. While factory parts cost more than aftermarket parts, they provide comparable performance. Slight variations in the design or fit of factory parts may increase the labor required to install them. Most shops try to purchase original equipment manufacturer (OEM) parts. However, if you can’t afford OEM parts, you can go with used factory parts.

Avoid fraud

Identifying signs of fraud at an auto body shop Denver, CO is very important if you want to prevent being ripped off. Scams often involve swapping out genuine parts for generic ones or charging inflated towing fees. Many times the auto body repair shop will involve the vehicle owner in fraudulent practices if the owner has been paying kickbacks.

First and foremost, ask yourself if the collision repair shop is reputable. Most shops are honest and play by the rules, but a few take advantage of people’s lack of knowledge about the industry. If you’re unsure, call your insurance agent. Remember that insurance fraud affects not only the customer but also the insurance company. Insurers want to protect their clients, so you must be savvy about the collision repair process.

Prepare for an appointment

When you schedule an appointment at an auto body repair shop, you’ll probably have a number of things on your mind. Perhaps you’re worried about your health or whether your vehicle needs repairs. Regardless of the reason, you should prepare your vehicle for the visit by doing some basic preparation.

Before your appointment, it is important to know your auto insurance policy. Ask your auto insurance provider if collision repairs are covered under your policy. Check the fine print and determine what the policy covers. Remember, you may not be able to use the coverage if you are at fault in the accident, so make sure you know what your policy says. You may be surprised by what you’re not aware of!

Clean out vehicle before going to an auto body repair shop

Clean out your vehicle before heading to an auto body repair shop. If your car is full of clutter, it will be difficult for the technician to perform their job. If you have the time, remove anything valuable from your vehicle and any items you need while your car is being repaired. However, cleaning out your car before a service appointment is not always possible. Fortunately, there are a few easy ways to get your car as clean as possible before a visit to an auto body shop.

Clean your car inside and out. Body shops wash cars and try to make them as clean as possible. A good auto body shop will detail the trunk and the undercarriage. Sometimes, customers do not open the trunk during delivery, but a good shop will be willing to do so for you. Make sure to remove any stains from the interior of your car with a special upholstery cleaner. This cleaner is different from the car wash soap you used. This cleaner is designed to dissolve coffee and soda pop stains, as well as dirt and road grime.

Reasons why body shops charge higher rates

Some auto body repair shops charge higher rates than others because of labor costs. In the 1970s and ’80s, labor rates increased by 60 percent or more in some areas. In the ’90s, the increase slowed to 27 percent. But today’s autos are more advanced and require more complicated repairs. Whether these factors are to blame or not is up to you to decide.

As a collision repair business, you have to invest in equipment, facilities, and ongoing training. This means that your rates must adjust to reflect these investments. While an increase in labor costs is an important thing to do, it’s not worth the loss to your bottom line if you’re not getting paid for the procedures. Therefore, if your shop charges higher labor rates than others, you need to make sure that you are charging the right rate.